herminshs Posted February 24, 2004 Share Posted February 24, 2004 Hi guys. Got this little problem, every time that I add a product to my store, I usually go to the manufacturer website and copy the specs from there to my description page, but it comes out all messed up, like this example: Sony Dome Camera (330TVLINE) Image Sensor : 1/3" Sony Color CCD Effective Pixels 510(H)*492(V): NTSC, 500(H)*582(V): PAL White Balance Automatic White Balance(AWB) Scanning System 525Lines(NTSC), 625Lines(PAL) 2:1 Interlace Sync. System Internal Scanning Frequency (H)15.734KHz (V)59.94Hz:NTSC, (H) 15.625KHz (V)50Hz: PAL Horizontal Resolution 330 TV Lines S/N Ratio 48dB(AGC Off) Video Output Signal VBS 1.0Vp-p Composite Min. Illumination 0.5 Lux at F1.2 AGC Availale Back Light Compensation Built-in(Auto) Automatic Electronic Shutter 1/60~100,000: NTSC, 1/50~100,000: PAL Operating Temperature 14~122F(-10~+50℃) Humidity Within 90%RH Power Source 80mA (DC 12V) Dimension(mm) 100? : 100(W)*85(L) / 120? : 120(W)*100(L) The way that I want it is like this: Sony Dome Camera (330TVLINE) Image Sensor :1/3\\\" Sony Color CCD Effective Pixels 510(H)*492(V): NTSC, 500(H)*582(V): PAL White Balance Automatic White Balance(AWB) Scanning System 525Lines(NTSC), 625Lines(PAL) 2:1 Interlace Sync. System Internal Scanning Frequency (H)15.734KHz (V)59.94Hz:NTSC, (H) 15.625KHz (V)50Hz: PAL Horizontal Resolution 330 TV Lines S/N Ratio 48dB(AGC Off) Video Output Signal VBS 1.0Vp-p Composite Min. Illumination 0.5 Lux at F1.2 AGC Availale Back Light Compensation Built-in(Auto) Automatic Electronic Shutter 1/60~100,000: NTSC, 1/50~100,000: PAL Operating Temperature 14~122F(-10~+50℃) Humidity Within 90%RH Power Source 80mA (DC 12V) Dimension(mm) 100? : 100(W)*85(L) / 120? : 120(W)*100(L) and I would like to add bullets in front of every line. I tried doing the following html command on them: <td>, and <tr>. But when I use those, the Product name goes under the description, not over it where I want it. Any Help Appreciated Link to comment Share on other sites More sharing options...
Squibz Posted February 24, 2004 Share Posted February 24, 2004 Did you try <ul>? Link to comment Share on other sites More sharing options...
zoomer Posted February 24, 2004 Share Posted February 24, 2004 HTML is translated when you use it in the product description textbox. I use everything from <b> to <div>(with style) to <ul> everything works actually. Link to comment Share on other sites More sharing options...
herminshs Posted February 24, 2004 Author Share Posted February 24, 2004 OK, I got , what I'm doing now is using frontpage to make the layout that I wanted, then pasting the html code into the pages, that's working for now. Thanks everyone Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.