From Fan 2 Fans Posted June 17, 2009 Share Posted June 17, 2009 It does not work for me. I have installed the last version available and followed all steps scrupulously. My cache folder is on 777 accordingly to the instructions. But, When I turn this contribution on, I have the following problems: _ images that I have placed as names of categories do not appear anymore. I simply see the name of the category _ product images are replaced by the name of the product _ nothing is created in te cache folder My first idea was that it should be a problem with my cache folder BUT, when I go to a product info page, the bigger image (original size) do not appear neither. Would you have an idea of what my problem could be? Thx a lot! Quote Link to comment Share on other sites More sharing options...
osCommaniak Posted June 17, 2009 Share Posted June 17, 2009 I installed this contribution on a new install and now the categories show up twice. I followed instructions to a T here is a example. Any idea what I did wrong? If I turn OSCThumbs off it goes back to normal. Turn it on it doubles up again. Sorry, but I don't know if you have uploaded images to categories or you have not? When you don't have uploaded pictures, then you in Administration -> Configuration -> Images -> Image Required -> set on: false. Otherwise, you need add images to every category. Quote Link to comment Share on other sites More sharing options...
Guest Posted June 24, 2009 Share Posted June 24, 2009 Thanks!! Quote Link to comment Share on other sites More sharing options...
NavCopy Posted June 30, 2009 Share Posted June 30, 2009 The install went clean and all appears to work, but the Pop-Up images are now very slow since I installed this contrib. It takes less than 1 sec when oscThumb is turned off compared to 5-7 sec. when I enable it! Anyone have the same issue and/or are able to point me in a direction to speed it up? Nav Quote Link to comment Share on other sites More sharing options...
vampirehunter Posted June 30, 2009 Share Posted June 30, 2009 i just installed this, it works fine except for one thing on one of the image i uploaded, the thumbnail has got a black bar on the right side of it added on? is it do with size or something? Quote Link to comment Share on other sites More sharing options...
lfabio2008 Posted July 1, 2009 Share Posted July 1, 2009 I tried both ImageMix and oscThumb 1.1, I can't seem to get the actual option in admin to turn the features on: could someone help? I copied the files into my OSC directory, ran the database modification, but the category is not there. Help would be appreciated. Thanks! Quote Link to comment Share on other sites More sharing options...
lfabio2008 Posted July 1, 2009 Share Posted July 1, 2009 Reply to my own post: after N tries, with a significantly high N, it works now. Why it did not before and it does now remains a mistery. oscThumb 1.1 + moreimages 'old' 1.4.3 + the popup_image files from the same contributor's imageMix work perfectly, after a few tries. Thanks! Quote Link to comment Share on other sites More sharing options...
AndiP Posted July 6, 2009 Share Posted July 6, 2009 Hi, first of all, nice contrib - good work! How can i stop the creation of gif thumbs? Thanks in advance! Quote Link to comment Share on other sites More sharing options...
tpokala Posted July 7, 2009 Share Posted July 7, 2009 It does not work for me. I have installed the last version available and followed all steps scrupulously. My cache folder is on 777 accordingly to the instructions. But, When I turn this contribution on, I have the following problems: _ images that I have placed as names of categories do not appear anymore. I simply see the name of the category _ product images are replaced by the name of the product _ nothing is created in te cache folder I have the same problem :( Any ideas? http://shop.1-25saf.com/ Quote Link to comment Share on other sites More sharing options...
Mortenjan Posted July 7, 2009 Share Posted July 7, 2009 Hi, Is it possible to fix a loading picture? instead of the product text? Regards Morten Quote Link to comment Share on other sites More sharing options...
lexp Posted July 11, 2009 Share Posted July 11, 2009 Hi, I installed this contribution on my shop when I was on my localhost (using xampp). Everything worked just fine. However, now I am online the thumbs don't appear. Instead it shows twice the product title. When I turn off oscthumb in admin it shows the images again on my page. Also: when i change the setting from on/off the first time i reload the page it shows this error: Warning: chdir() [function.chdir]: Unable to access /phpThumb/cache in /home/xxx/domains/mysite/public_html/includes/classes/oscthumb.php on line 260 The error disappear when I refresh the page for the second time.. The cache directory is Cmod to 777. anyone got an idea? Quote Link to comment Share on other sites More sharing options...
sitespt2 Posted July 31, 2009 Share Posted July 31, 2009 Hi! I'm having same problem here with my XAMPP installation on MAC. No pictures are visible if I turn oscThumb on I checked and phpThumb/cache is 777 but I don't see any pictures there when I add a product. Maybe a wrong path? I have define('DIR_FS_CATALOG', '/Applications/XAMPP/xamppfiles/htdocs/store/'); Can be a problem from something related to this? Thanks to all, JM Quote Link to comment Share on other sites More sharing options...
kkaland Posted August 3, 2009 Share Posted August 3, 2009 Hi there, I've searched through the thread, but can't find the answer to a particular problem I'm getting. The end result is that no images are being displayed. I have some more information too; when I go directly to the oscThumb.php link, I get a message which basically says: The image <image path> cannot be displayed because it contains errors. Is there a problem with my source files? Any help much appreciated. Kevin Quote Link to comment Share on other sites More sharing options...
ShaneRounce Posted August 5, 2009 Share Posted August 5, 2009 For those of you having issues with Images not displaying, even though you've correctly chmodded and set your cache directory.... I was having the same issues, so I followed the source file for one of the Images that was suppose to be displayed (I found this through the Source Code of my page). I then worked out from here, to do the following... Open /phpthump/phpThumb.config.php and find: $PHPTHUMB_CONFIG['document_root'] = DIR_FS_CATALOG; // oscThumb: added osCommerce directory Delete it! Then find: //$PHPTHUMB_CONFIG['document_root'] = '/home/httpd/httpdocs'; And replace with: $PHPTHUMB_CONFIG['document_root'] = '/home/blah/blah'; (Remember to input your own Server path.) Save phpThumb.config.php Now open oscthumb.php and find: chdir ('DIR_FS_CATALOG'); (Should be on Line 20) Just Delete it! Save oscthumb.php! This fixed it for me. :) Good luck in your endeavours! - Shane Rounce Quote Link to comment Share on other sites More sharing options...
nudylady Posted August 21, 2009 Share Posted August 21, 2009 It displayed image no GD instead of all products images. Quote Link to comment Share on other sites More sharing options...
nudylady Posted August 21, 2009 Share Posted August 21, 2009 It displayed image no GD instead of all products images. Solved. Installed GD on my server. Switch on oscThumb I go to a page with 40 products. Each product pic is 30-40K. I can see mouse scroll up and down is much faster than before. If I do a website speed test, i.e. http://www.iwebtool.com/speed_test No matter of oscThumb on or off the test result is about the same. The page size remains at 64 KB. Why is this? Quote Link to comment Share on other sites More sharing options...
kurios Posted August 24, 2009 Share Posted August 24, 2009 Anyone got it to work with Lightbox yet? It would be great... Quote Link to comment Share on other sites More sharing options...
nudylady Posted August 26, 2009 Share Posted August 26, 2009 Anyone got it to work with Lightbox yet? It would be great... I also want to use lightbox. But I need STS, oscThumb, Lightbox work together. I cannot sort it out. Quote Link to comment Share on other sites More sharing options...
kurios Posted August 26, 2009 Share Posted August 26, 2009 The only thing that doesnt work with lightbox is the watermarking of pop-up images. It shouldnt be too hard to fix for a forum member more gifted than i am? Quote Link to comment Share on other sites More sharing options...
Guest Posted August 26, 2009 Share Posted August 26, 2009 I have installed this contribution and everything works fine except it doesn't work well with my "Extra Images" contribution. You know the one where you can have multiple thumbnails on one product in the product_info page. Here is a link to the contribution I'm referring too. link to contribution Anyway when you scroll over any of the thumbnails the whole thing wacks out and shows a full sized images in place of all the thumbnails. Unlike before if you rolled over any of the small thumbnails it displays in the top larger thumbnail. Anyone else having this issue or can help me out? I'd really appreciate it Below is where I suspect the problem lies.... $products_extra_images_query = tep_db_query("SELECT products_extra_image, products_extra_images_id FROM " . TABLE_PRODUCTS_EXTRA_IMAGES . " WHERE products_id='" . $product_info['products_id'] . "'"); if (tep_db_num_rows($products_extra_images_query) >= 1){ $rowcount_value=4; //number of extra images per row $rowcount=1; ?> <table border="0" width="100%" cellspacing="2" cellpadding="1" class="br"> <tr> <?php //$products_extra_images_query = tep_db_query("SELECT products_extra_image, products_extra_images_id FROM " . TABLE_PRODUCTS_EXTRA_IMAGES . " WHERE products_id='" . $product_info['products_id'] . "'"); while ($extra_images = tep_db_fetch_array($products_extra_images_query)) { ?> <TD CLASS="infoBoxContents" align ="center"> <?php echo "<a href=\"java script:popupWindow('" . tep_href_link(FILENAME_POPUP_EXTRA_IMAGES, 'peiID=' . $extra_images['products_extra_images_id']) . "')\">" . tep_image(DIR_WS_IMAGES . $extra_images['products_extra_image'], SMALL_IMAGE_WIDTH/2, SMALL_IMAGE_HEIGHT/2, "hspace='5' vspace='5'". " onMouseOver=\"java script:window.document.prodimg.src='" . DIR_WS_IMAGES . $extra_images['products_extra_image'] . "'\" onMouseOut=\"java script:window.document.prodimg.src='" . DIR_WS_IMAGES . $product_info['products_image'] . "'\"" ) . '<br>' . TEXT_CLICK_TO_ENLARGE . '</a>'; ?> </td> <?php if ($rowcount == $rowcount_value){echo '</tr><tr>'; $rowcount=1;} else {$rowcount=$rowcount+1;} } ?> Hi, I know this particular issue with oscThumb is quite old, but just in case anyone else is having the same problem (as I did): Find the following code in "catalog/product_info.php" (the code you seek is an alteration made during the install of the Products Extra Images" contribution): document.write('<?php echo '<a href="' . tep_href_link(DIR_WS_IMAGES . $product_info['products_image']) . '" target="_blank" rel="prettyPhoto[' . $product_info['products_name'] . ']" title="'.$product_info['products_name'].'" >' . tep_image(DIR_WS_IMAGES . $product_info['products_image'], "", SMALL_IMAGE_WIDTH, SMALL_IMAGE_HEIGHT, 'class="prodimg" hspace="5" vspace="5" name="prodimg"') . '<br>' . TEXT_CLICK_TO_ENLARGE . '</a>'; ?>'); and replace it with this: document.write('<?php echo '<a href="' . tep_href_link(DIR_WS_IMAGES . $product_info['products_image']) . '" target="_blank" rel="prettyPhoto[' . $product_info['products_name'] . ']" title="'.$product_info['products_name'].'" >' . tep_image(DIR_WS_IMAGES . $product_info['products_image'], "", SMALL_IMAGE_WIDTH, SMALL_IMAGE_HEIGHT, 'class="prodimg" hspace="5" vspace="5" name="prodimg"', true) . '<br>' . TEXT_CLICK_TO_ENLARGE . '</a>'; ?>'); You will notice that the only difference between the two lines of code is that I have added an extra parameter to the tep_image call in the replacement, which tells oscThumb to use the original thumbnail, rather than generating its own. Cheers, Paul Quote Link to comment Share on other sites More sharing options...
nudylady Posted August 31, 2009 Share Posted August 31, 2009 The only thing that doesnt work with lightbox is the watermarking of pop-up images. It shouldnt be too hard to fix for a forum member more gifted than i am? Can you give a link of lightbox contribution you use? do you have STS? Quote Link to comment Share on other sites More sharing options...
kurios Posted August 31, 2009 Share Posted August 31, 2009 Can you give a link of lightbox contribution you use? do you have STS? Hi, I use this one: http://addons.oscommerce.com/info/6517 Together with more pics 1.4.3: http://addons.oscommerce.com/info/1611 I don't use STS. Quote Link to comment Share on other sites More sharing options...
nudylady Posted August 31, 2009 Share Posted August 31, 2009 Hi, I use this one: http://addons.oscommerce.com/info/6517 Together with more pics 1.4.3: http://addons.oscommerce.com/info/1611 I don't use STS. This combination is what I used for my oscmax store. oscthumb + lightbox + STS would be very hard... Quote Link to comment Share on other sites More sharing options...
knifeman Posted September 4, 2009 Share Posted September 4, 2009 The install went clean and all appears to work, but the Pop-Up images are now very slow since I installed this contrib. It takes less than 1 sec when oscThumb is turned off compared to 5-7 sec. when I enable it! Anyone have the same issue and/or are able to point me in a direction to speed it up? Nav Same here. I turned watermarking off of the small images because the pages loaded so slowly. Watermarked pop ups only and they load slooooow! Too slow. I also had problems with the text marking. It seems like it is off set for some reason. If I tell it center, it starts up and to the left. If I make the font really big, the text starts somewhere off screen and you cannot even see it. Tim Quote Link to comment Share on other sites More sharing options...
osCommaniak Posted September 8, 2009 Share Posted September 8, 2009 (edited) Hello everyone I have installed oscthumb and I am very well with this great contribution, but I will validate the site according to the standard w3c and not This contribution will allow me because it adds the character & images, I have tried to replace it with & but doing so you do n't see the images... Someone has any idea?? Maybe an integration with Ultimate SEO URLs? Thanks to all :rolleyes: Antonello Hi friend! I published a solution to your problem. Now oscThumb is 100% compatible with w3c. See oscThumb_1.1a package. Edited September 8, 2009 by osCommaniak Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.