hammy Posted September 19, 2002 Share Posted September 19, 2002 hello, I've selected the shipping module 'Table Rate' but the only price that shows up is the 'handling fee', here is how it is setup? Any help would be greatly appreciated!! Table Rate Enable Table Method 1 Shipping Table 18:5.00,50:10.00,89:25.00;119:30.00,900:200.00 Handling Fee 8.50 Table Method price Thanks, Hammy Link to comment Share on other sites More sharing options...
Guest Posted September 3, 2004 Share Posted September 3, 2004 not sure why that is, im having some problems with the rate not coming up correctly all the time ie; setup based on weights, i have 100:1.00,1000:3.50,10000:6.00,500000:8.00 defined. But if i order 99 products weighing 1.00 each it comes up with 3.50, whys that? Any help on setting this up appreciated here too Link to comment Share on other sites More sharing options...
Ziggy Posted June 8, 2005 Share Posted June 8, 2005 Having the same problem. I notice some mods use pounds and some use kilograms - this *may* explain it, but I can't find any reference to it in the files. Or it could be to do with 'boxes' - i.e. the number of packages the order will be dispatched in. This seems to be in the code but doesn't appear at all in admin or on checkout. Curious. Link to comment Share on other sites More sharing options...
Ziggy Posted June 8, 2005 Share Posted June 8, 2005 Sorted it. Look in Configuration->Shipping/Packaging in Admin and set the values for 'Tare Weight' (which I'm guessing means packaging weight) and again for the percentage increase on large packages. I'm using the weight column as 'shipping cost' rather than a weight, so I've set both the values above to zero. HTH Link to comment Share on other sites More sharing options...
stevlam Posted September 23, 2005 Share Posted September 23, 2005 Sorted it. Look in Configuration->Shipping/Packaging in Admin and set the values for 'Tare Weight' (which I'm guessing means packaging weight) and again for the percentage increase on large packages. I'm using the weight column as 'shipping cost' rather than a weight, so I've set both the values above to zero. HTH <{POST_SNAPBACK}> Hi I have the same problem - I have set the tare weight and percentage increase to 0 but still the shipping does not display. Any ideas? Link to comment Share on other sites More sharing options...
Guest Posted October 13, 2007 Share Posted October 13, 2007 I've same problem with "Shipping Table Rate". --It's return incorrect cost. My Shipping Table Rate is: 250:23.54,499:25.29,999:35.89,1499:45.88,1999:56.18,2499:66.47,2999:76.76 Case study: Buy item weight 1500 Result = $766.82 ! Please any help Link to comment Share on other sites More sharing options...
Guest Posted October 13, 2007 Share Posted October 13, 2007 I've same problem with "Shipping Table Rate". --It's return incorrect cost. My Shipping Table Rate is: 250:23.54,499:25.29,999:35.89,1499:45.88,1999:56.18,2499:66.47,2999:76.76 Case study: Buy item weight 1500 Result = $766.82 ! Please any help Sawasdee Car You picked an old thread to post in! Is your site using Baht or $ It looks like you are using grams for your weight. The usual problem is that the tare weight that is set in admin is 3, but I do not see how that applies here. The price that should come up is 56.18 and if you have posted the entire rates, the top price should have been 76.18 What table rate are you using, what is your url? Link to comment Share on other sites More sharing options...
Guest Posted November 29, 2007 Share Posted November 29, 2007 Hi I have the same problem - I have set the tare weight and percentage increase to 0 but still the shipping does not display. Any ideas? Thank you Steven, I had a problem with my shipping charges, I thought it may be the tare wieght and have now 0'd out the tare wieght plus the percentage area as you have done and it seems to be working... thanks so much... peace and blessings... greta.. Link to comment Share on other sites More sharing options...
Guest Posted November 29, 2007 Share Posted November 29, 2007 Hi I have the same problem - I have set the tare weight and percentage increase to 0 but still the shipping does not display. Any ideas? Thanks ziggy... looks like it is working for me... Link to comment Share on other sites More sharing options...
scientica Posted March 19, 2008 Share Posted March 19, 2008 Please note that you should be adding table as Kgs:US$ which is expressed as 3.00:5,4.00:7, and so on. However, please note that I have observed that the osComm calculates the total weight of items added and tries to tally the weight to the table you have inserted. If for e.g. you have added five items weighing 1, 3, 5 kgs and if you have added table rate only up to 5 kgs then you will end up getting errors. Link to comment Share on other sites More sharing options...
New 
Recommended Posts
Archived
This topic is now archived and is closed to further replies.